RP2040 Type C Development Board
3.50 $This RP2040-Zero Type-C Development Board is a compact microcontroller based on the RP2040 chip, featuring a dual-core ARM Cortex M0+ processor up to 133MHz, 264KB SRAM, 2MB Flash, and USB-C connectivity.
Showing 181–200 of 253 results


This RP2040-Zero Type-C Development Board is a compact microcontroller based on the RP2040 chip, featuring a dual-core ARM Cortex M0+ processor up to 133MHz, 264KB SRAM, 2MB Flash, and USB-C connectivity.

This RS485 to USB Adapter is a compact USB dongle that converts RS485 signals to USB for serial communication.


A multipurpose dipole antenna kit for those getting started with SDR. It includes a dipole base, coax extension, telescopic antennas, and mounting options for flexible placement.

The RTL-SDR V2 RTL2832U FC0013 is a software-defined radio (SDR) USB receiver that operates across a wide frequency range of 22 to 1100 MHz. Powered by the RTL2832U tuner and FC0013, it includes an antenna and standard USB interface for easy connectivity, making it an ideal tool for radio frequency research, experimentation, and analysis.

Shop the RTL-SDR V3 in Lebanon! A powerful software-defined radio dongle for wideband reception, decoding, and exploration. Perfect for hobbyists and professionals.


Upgrade your radio scanning with the RTL-SDR Blog V4. Wide tuning range (500 kHz–1.7 GHz), enhanced performance, HF support, and a versatile antenna kit. Perfect for hobbyists and professionals!


RTL-SDR 100kHz–1700MHz receiver with TCXO, aluminum case, SMA connector, and USB power, supporting AM, FM, DAB+, LSB, and more.


The RTL-SDR Blog V4L (Lite) is a compact USB software defined radio receiver featuring the R828S tuner, RTL2832U chipset, 1 PPM TCXO, built-in HF upconverter, bias tee circuit, and aluminum enclosure with passive cooling. Suitable for HF, VHF, UHF, and L-band reception, it delivers improved sensitivity over the V4 design and is ideal for amateur radio operators, hobbyists, students, and RF enthusiasts.
Drivers and software support for the V4L are still limited. WITS will not provide technical support related to drivers and software compatibility. Please consider the V3 instead, unless you’re comfortable troubleshooting drivers and software.


ATmega32U4-based USB virtual keyboard development board with 5V DC input, 5 I/O channels, and HID support—compact, efficient, and ready to ship from Lebanon.

The Screen Crab by Hak5 is a stealthy video man-in-the-middle implant.
This covert inline screen grabber sits between HDMI devices – like a computer and monitor, or console and television – to quietly capture screenshots. Perfect for sysadmins, pentesters and anyone wanting to record what’s on a screen.
WiFi enabled to stream screenshots via Hak5 Cloud C2.

Buy the Security Key C NFC by Yubico for passwordless login and two-factor authentication (2FA). USB-C and NFC-enabled for secure access—available in Lebanon.

Secure your accounts with the Security Key NFC by Yubico. Enjoy passwordless login and two-factor authentication (2FA) with NFC technology—available in Lebanon.


The Seeed Studio XIAO ESP32-C3 is a compact and powerful development board based on the ESP32-C3 RISC-V chip. Operating up to 160 MHz, it supports Wi-Fi and Bluetooth 5.0 connectivity, features low-power operation, and includes lithium battery management, making it ideal for portable and IoT applications.


The Seeed Studio XIAO ESP32-C6 is a compact development board powered by the two-core RISC-V ESP32-C6 SoC, featuring Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 connectivity. It offers hardware-level security and ultra-low power consumption. Available from WITS in Lebanon.


The Seeed Studio XIAO ESP32-S3 Board is a compact IoT development board with a powerful dual-core processor, built-in WiFi and Bluetooth 5.0, and ultra-low power consumption for battery-powered applications.


SFF-8087 to 4x SATA (forward) Breakout Cable (0.5m/1m) connects a Mini SAS interface to four SATA 7-pin ports.
For example, used to connect SATA drives to server-grade HBA.

SFF-8087 to 4x SATA Reverse Breakout Cable (0.3m) connects a Mini SAS 36-pin interface to four SATA 7-pin ports.
NOTE: This is a REVERSE breakout cable.


Faraday Tape in 25mm or 45mm widths, sold by the meter or 20 meters, offers EMI shielding for various electronic applications.
Protect your Flipper Zero with a durable silicone case. Lightweight, shockproof, and stylish, it ensures ultimate device safety and a sleek look.


The Single Door Access Control Board 12V Wiegand is a compact standalone controller designed to manage access for a single entry point. It supports up to 1000 users and can connect to external Wiegand 26–44 RFID readers or DS1990A touch memory readers. Featuring reliable 12V operation, relay lock output, and easy configuration, it offers a practical and efficient solution for secure access control systems.